High Performance Coatings

qcworks with high performance coatings every day. HP coatings range from single component industrial enamels to three and four part novolac based vinyl ester epoxies. These durable and chemically resistant coatings are applied using brushes, rollers, sprayers, and are sometimes troweled on at very heavy mil thicknesses. Product and process knowledge is key when applying these very expensive coatings. At QC, we are well versed in proper surface preparation and installation of the following high performance materials:

  • Novolac Vinyl Ester Epoxy (with and without glass flake)
  • High Solids Polyurethane
  • Traffic & Waterproof Coatings
  • Polyamide Epoxy
  • Solvent and Waterbased 2-Part Epoxies
  • Elastomerics
  • Liquid Elastomeric Roof Coatings
  • Thin Mil Epoxy Floor Coatings
  • Dryfall / Dryfog
  • Industrial Enamels
  • High Temp Paint (to 1,800 degrees F)
  • High Performance Acrylics
  • Polyurethane Caulk and Joint Sealants
  • QC Commercial - High Performance Coatings

We paint a lot of concrete and steel. In many cases we work in environments that are not friendly to your average coatings. Therefore we’ve become very familiar with various industrial strength coating systems designed to protect against broad temperature changes, caustic chemical exposure, and natural elements like ultra-violet rays, high wind, and moisture. We understand the critical importance of properly preparing steel and concrete before applying protective coatings.

Much of our work is performed under the close scrutiny of NACE Level 3 inspectors. By working with NACE, the coating manufacturer, and the customer’s project engineers, QC can afford to provide extended warranties without being concerned about performance failures. We have warranted secondary containment systems for as long as 25 years!

We have partnered with two of North Carolina’s leading sandblasting companies so when surface preparation requires more than hand tooling, we can still provide a total solution. We have in-house experts that know the SSPC Standards as they relate to surface prep. We also have close alliances with our material suppliers, such as Sherwin-Williams, PPG, and Tnemec. By operating collaboratively with our suppliers and customers, we can be sure that when we install a high performance system it is without doubt the right system for the job.

If your company is planning a facility upgrade or expansion, or just need someone to handle your ongoing facility maintenance requirements as they relate to paints and coatings, contact us here at QC. We would love to speak to you about your plans. We’ll be happy to send out a professional representative from our team to recommend the right solutions to the issues you face.

If you are a general contractor wanting to build a lasting relationship with a subcontractor with integrity, call us. We would be glad to discuss your upcoming projects with you, or provide you with a competitive proposal on potential new work you may be bidding.

We have no doubt that you will be surprised, if not amazed, at the level of service, professionalism, and commitment you will receive from everyone aboard the QC team.

Remember… “We provide Quality Coatings when Quality Counts! We are QC.”